Product ID:DIRECT-TO-METAL PRMR CAT, NCX275 (060994D)
MSDS Date:06/15/1994
FSC:8010
NIIN:00N065455
MSDS Number: CBCYQ

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 340-843-1300

Info Phone: 412-492-5555

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

ETHOXYLATED BISPHENOL A DIMETHACRYLATE; (DIACRYLATE)

CAS: 24447-78-7

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

ACETONE (SARA 313) (CERCLA)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 15-20%

OSHA PEL 1000 PPM

ACGIH TLV: 750PPM/1000STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-HEPTANONE; (METHYL N-AMYL KETONE)

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 50-55%

OSHA PEL N/K

ACGIH TLV: N/K

DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST

RTECS: 9999999ZZ

BELOW THE STATED LIMIT, AND TO REMOVE DECOMPOSITION

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE: IRRIT. SKIN: MAY CAUSE MOD IRRIT. MAY BE HARMFUL IF
ABSORBED THRU SKIN. PRLNG/RPTD CONT MAY CAUSE ALLERGIC SKIN RXN.
INHAL: VAP & SPRAY MIST MAY BE HARM FUL IF INHAL. VAP IRRIT EYES,
NOSE & THROAT. RPTD EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP
SYS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: & PERM BRAIN & CNS DMG. INTENTIONAL
MISUSE BY DELIBERATELY CONC & INHAL CONTENTS CAN BE HARMFUL/FATAL.
EYE WATERING, HDCH, NAUS, DIZZ & LOSS OF COORD INDICATE SOLV LEVELS
ARE TOO HIGH. REDNE SS, ITCH, BURNING SENSATION & VISUAL DISTURB
MAY INDICATE EXCESS EYE CONT. DRYNESS, ITCH, CRACKING, BURNING,
(SUP DAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER,
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RES P & OTHER SUPPORTIVE MEASURES AS REQUIRED. IF
INGEST, ANY TYPE OF OVEREXP/SYMP OF OVEREXP OCCUR DURING/FOLLOWING
USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD IMMED. HAVE MSDS
INFO AVAILABLE.

Flash Point Method:PMCC
Flash Point:1F,-17C
Lower Limits:2.5%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUP DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS TO PVNT PRESS (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON (SUP DAT)

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE
ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORBENT MATE RIAL & PLACE INTO CONTAINERS FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID LONG TERM & REPEATED CONT. DO
NOT STORE > 120F. STORE LARGE QUANTITIES IN BUILDINGS DESIGNED &
PROTECTED FOR STOR OF NFPA CLASS IB FLAMM LIQS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT SYS, READ MSDS
FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING, AS RSLT MIX MAY
HAVE HAZ OF ALL OF ITS PARTS. CONTRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FA LL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
AIR PURIFYING/AIR SUPP (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUCTION S & LITERATURE CAREFULLY TO (ING 6)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS < LOWEST SUGGESTED EXPOS LIM, LEL (ING 7)
Protective Gloves:NITRILE RUBBER OR NEOPRENE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:IMPERMEABLE APRON. EMERGENCY EYEWASH &
DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: CLASS IB LIQ FIRES. FIRE FIGHT PROC: BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREFERABLE. EXPLO HAZ: HOT SURF. TOX GASES MAY FORM WHEN P
ROD IS CONT BY FLAME/HOT SURF. EFTS OF OVEREXP: REDNESS & SWELL ARE
CNDTNS ASSOC W/EXCESS SKIN CONT.

Boiling Pt:B.P. Text:>133F,>56C
Vapor Pres:115.3
Vapor Density:HVR/AIR
Spec Gravity:0.99
Evaporation Rate & Reference:560 (BUTYL ACETATE=100)
Solubility in Water:18.7%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGS SECTION.
Percent Volatiles by Volume:49.54

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING MAY PRODUCE FUMES INCL
CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.